Apple has not revamped its legacy 15 inch Mac's but rather increased the size of the Mac to 16 inch. The newly released Apple 16" MacBook Pro (2019) gets a specs update although still keeps many of the features from the 2018 model. While supporting the newer and more powerful 9th Generation Intel 6-core processor, the 16 inch Mac continues to provide four Thunderbolt 3 enabled USB Type-C connectors on the Touch Bar version. Despite also supporting DisplayPort 1.4 through the Intel Titan Ridge Thunderbolt 3 chipset, the 16 inch Mac is still not hitting the 8K display benchmark, rather just allowing at most two 6K@60hz displays over its Thunderbolt 3 connector. Yet this is still an upgrade from max two 5K@60hz displays over Thunderbolt 3 on the 15" MacBook Pro (2018).
The Thunderbolt 3 based USB Type-C connectors on the 16" MacBook Pro (2019) support Thunderbolt 3 (40 Gb/s), USB 3.1 Gen 2 (10 Gb/s), DisplayPort 1.4, and USB Power Delivery 2.0. The Mac now runs on the macOS Catalina surpassing the previous 2018 macOS High Sierra.
Having purchased the 16" MacBook Pro (2019) we can see what's inside its packaging.
Apple proudly showcased the Mac on almost the entire front of the box to highlight their newest 16 inch model.
This 16" MacBook Pro (2019) model comes with Touch Bar, 2.6GHz 6-core Intel Core i7 processor, 16GB DDR4 memory, 512GB SSD, AMD Radeon Pro 5300M GPU, Intel UHD 630 graphics and four Thunderbolt 3 based USB Type-C connectors among other specs and features.
The 16" MacBook Pro (2019) ships with the new Apple 96W USB-C Power Adapter which supports USB Power Delivery charging up to 96W (20.5V@4.7A). The supplied USB Type-C to Type-C cable accessory can be used to connect the Apple charger and Mac through the Thunderbolt 3 port for rapid charging.
However we tested the Mac to get up to only max 86W charging using the 96W adapter (more details in later posts). This is almost similar to the power that the Apple 87W adapter can deliver to the 15" MacBook Pro (2018).
One of the most obvious change about the 16" MacBook Pro (2019) is the new Magic keyboard. This comes as a more traditional keyboard with inverted-T arrow keys and Esc key which might also be easier to type on compared to the flatter keys of the Butterfly keyboard on older Mac's.
The Mac still has four Thunderbolt 3 enabled USB Type-C ports on both sides with two adjacent connectors on each side. These Thunderbolt 3 ports can also be used to charge the Mac itself. The analog 3.5mm audio port is still kept on the right hand side of the Mac.
The initial setup process is relatively simple to follow through especially for those who are already familiar with any other Mac setup. You will be able to see the Touch Bar light up and ready for use when the Mac setup is almost complete.
Using the USB Power Delivery Compliance C2 Tester from Granite River Labs to run just a subset of the full USB Power Delivery compliance test suite, we can see that the 16" MacBook Pro (2019) supports 15 watts (5 volts @ 3 amps) fixed PDO and variable power supply of 22.3 to 98.7 watts range (4.75-21 volts @ 4.7 amps) for charging. Note compliance failures were mostly observed for this Mac.
Supply Type #1
OP Current #1
Supply Type #2
Min Voltage #2
Max Voltage #2
Op Current #2
PD2 Communication Engine Tests - Test Result Summary
TDA.220.127.116.11 BMC PHY TX EYE
TDA.18.104.22.168 BMC PHY TX BIT
TDA.22.214.171.124 BMC PHY RX INT REJ
TDA.126.96.36.199 BMC PHY RX BUSIDL
TDA.188.8.131.52 BMC PHY TERM
TDA.184.108.40.206 BMC PHY MSG
TDA.2.2.1 BMC PROT SEQ GETCAPS
TDA.220.127.116.11 BMC PROT SEQ CHKCAB P PC
TDA.18.104.22.168 BMC PROT SEQ CHKCAP NOMARK P PC
TDA.22.214.171.124 BMC PROT SEQ CHKCAP NOMRK CP ACC
TDA.2.2.7 BMC PROT BIST NOT 5V SRC
TDA.2.2.9 BMC PROT GSC REC
TDA.126.96.36.199 POW SRC TRANS P PC
TDA.188.8.131.52 POW SNK TRANS C CP
BMC Eye Diagram